Industry Group equipped with the most advanced Rolling Mills, Vertical Bright Annealing Lines, Degreasing Lines, Precision Slitters, Shearing Lines and Stretch Bend Leveling Line. We are capable to
If you are planning to buy 440c stainless steel strip China from professional 440c stainless steel strip, 440c strip, 440c coil manufacturers China and suppliers China, please feel free to contact Beall Industry Group, equipped with productive factory, we are always at your service.
Industry Group equipped with the most advanced Rolling Mills, Vertical Bright Annealing Lines, Degreasing Lines, Precision Slitters, Shearing Lines and Stretch Bend Leveling Line. We are capable to produce high precision quality metal with 0.05mm minimum thickness and 2.0mm minimum width. We enjoy specially design and advanced equipment to offer special needs to our clients.
Standard: AISI, ASTM, DIN, EN, GB and JIS
1. Thickness: 0.05mm~5mm
2. Width: 2.0mm~1500mm
Coil ID: 150mm - 610mm
Coil OD: 300mm - 1200mm
1. Auto Parts:
a) Mobile phone Outer shellb) Disc switch c) Etching partsd) Electronic stamping parts e) Electron gun parts f) Protecting tube of Optical fiber cable
2. Auto Parts:
a) Cylinder Gasket b) Piston expansion ring c) End cap of Auto filter. d) Decoration strip
3. Kitchen appliance:
a) Stainless Steel Kitchenware
4. Textile and light industry:
a) Weaving machine shaft b) Weaving machine loom reed
5. Medical Devices:
a) Surgical Blade b) Surgical Needle c) Catheter stents for operation.
6. Construction Decoration:
a) Elevator b) Floor Heating c) Other decorations
a) Aero turbine Fastener b) Stainless steel membrane c) Precision stainless steel capsule
Hot rolled stainless steel strip is a semifinished product obtained from the hot rolling of slabs or billets and is produced for conversion by cold rolling.
rolled stainless steel strip is manufactured from hot rolled, annealed
and pickled strip by cold rolling on polished rolls. Depending on the
thickness desired, the cold rolling requires various numbers of passes
through the mill to effect the necessary reduction and to secure the
desired surface characteristics and mechanical properties. Only three
rolled (unpolished) finishes (No. 1, No. 2 and bright annealed) and one
polished finish (mill buffed) are commonly supplied on stainless steel